Projects / Ideas / Switch types tour

Switch types tour

BeginnerLearningIdeaReviewed
In short

How do you build a switch types tour?

Wire a toggle, a slide switch, a rocker, a limit switch and a micro switch to an LED and a multimeter in continuity mode. You learn contacts, normally open and normally closed, and how each style suits a different job. You need Toggle switch SPDT (MTS-102), Slide switch SPDT (SS12D00), Rocker switch (KCD1, 2-pin), Limit switch (micro switch with lever), Micro switch with roller lever, LED 5 mm green, Resistor 330 Ω, 9 V battery, 9 V battery snap with DC jack, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

Level
Beginner
Time
About 45 min
Parts
11
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Learn what each kind of switch is for by trying them all.

How to build it

  1. Find the common, normally open and normally closed pins with the meter
  2. Wire each switch in turn to an LED
  3. Note which feel and which click
  4. Match each switch to a job such as a door, a power switch or a cam
  5. Write a short buying guide

Related projects

Common questions

What parts do I need for the switch types tour?

Toggle switch SPDT (MTS-102), Slide switch SPDT (SS12D00), Rocker switch (KCD1, 2-pin), Limit switch (micro switch with lever), Micro switch with roller lever, LED 5 mm green, Resistor 330 Ω, 9 V battery, 9 V battery snap with DC jack, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

How long does the switch types tour take to build?

About 45 minutes for a beginner maker.