Idea
In short
How do you build a humidity-controlled box fan?
A small fan runs when humidity in a storage box rises above a set value. You need Arduino Nano, AHT20 temperature and humidity sensor, MOSFET IRLZ44N, DC motor 130 size (toy motor), Rectifier Diode 1N4007, Resistor 10 kΩ and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Control a fan with hysteresis.
Parts list
- Development Boards
- Sensors
- Semiconductors
- Motors & Actuators
- Semiconductors
- Passives
- Prototyping
How to build it
- Read humidity
- Set on and off thresholds
- Drive the fan with a MOSFET
- Add a flyback diode
- Log the cycles
Common questions
What parts do I need for the humidity-controlled box fan?
Arduino Nano, AHT20 temperature and humidity sensor, MOSFET IRLZ44N, DC motor 130 size (toy motor), Rectifier Diode 1N4007, Resistor 10 kΩ and Breadboard 830 Tie Points.
How long does the humidity-controlled box fan take to build?
About 150 minutes for a intermediate maker.
