Projects / Ideas / Stripboard LED chaser

Stripboard LED chaser

BeginnerGames & ToysIdeaReviewed
In short

How do you build a stripboard LED chaser?

A 555 and a counter chip drive ten LEDs on stripboard with cut tracks you plan yourself. You need Stripboard (Veroboard) 10 × 10 cm, NE555 Timer IC, CD4017 Counter, LED 5 mm red × 10, Resistor 220 Ω × 10, Resistor 10 kΩ, Electrolytic capacitor 10 µF and Solder wire 60/40 (0.8 mm, 50 g).

Level
Beginner
Time
About 270 min
Parts
8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Plan track cuts on stripboard.

Parts list

How to build it

  1. Plan the strip layout
  2. Cut the tracks
  3. Solder the chips in sockets
  4. Add the LEDs
  5. Test and tune speed

Related projects

Common questions

What parts do I need for the stripboard LED chaser?

Stripboard (Veroboard) 10 × 10 cm, NE555 Timer IC, CD4017 Counter, LED 5 mm red × 10, Resistor 220 Ω × 10, Resistor 10 kΩ, Electrolytic capacitor 10 µF and Solder wire 60/40 (0.8 mm, 50 g).

How long does the stripboard LED chaser take to build?

About 270 minutes for a beginner maker.