Projects / Ideas / Steady-hand buzz wire game

Steady-hand buzz wire game

BeginnerGames & ToysIdeaReviewed
In short

How do you build a steady-hand buzz wire game?

Guide a metal loop along a bent wire without touching it: a touch lights a LED and buzzes, and the board counts your misses. You need Arduino Nano, Passive buzzer, LED 5 mm red, Resistor 330 Ω, Tactile push button 6 mm, Hook-up wire 22 AWG solid (6 colours) and Breadboard 830 Tie Points.

Level
Beginner
Time
About 100 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Make a contact game.

Parts list

How to build it

  1. Bend the track wire
  2. Make the handheld loop
  3. Wire the contact to an input
  4. Beep and count each touch
  5. Add a reset button and a timer

Related projects

Common questions

What parts do I need for the steady-hand buzz wire game?

Arduino Nano, Passive buzzer, LED 5 mm red, Resistor 330 Ω, Tactile push button 6 mm, Hook-up wire 22 AWG solid (6 colours) and Breadboard 830 Tie Points.

How long does the steady-hand buzz wire game take to build?

About 100 minutes for a beginner maker.