Idea
In short
How do you build a first stripboard circuit?
Cut the tracks on a piece of stripboard and solder a simple LED flasher so the circuit leaves the breadboard for good. You need Stripboard (Veroboard) 10 × 10 cm, NE555 Timer IC, LED 5 mm red, Resistor 1 kΩ, Resistor 10 kΩ, Electrolytic capacitor 10 µF, Lead-free solder wire (SAC305) and Hook-up wire 22 AWG solid (6 colours).
- Level
- Beginner
- Time
- About 180 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Move a circuit onto stripboard.
Parts list
- Prototyping
- Integrated Circuits
- Semiconductors
- Passives
- Passives
- Passives
- Tools & Instruments
- Cables & Wires
How to build it
- Plan the layout on paper
- Cut the tracks
- Solder the socket and parts
- Link with wire
- Test and fix cold joints
Common questions
What parts do I need for the first stripboard circuit?
Stripboard (Veroboard) 10 × 10 cm, NE555 Timer IC, LED 5 mm red, Resistor 1 kΩ, Resistor 10 kΩ, Electrolytic capacitor 10 µF, Lead-free solder wire (SAC305) and Hook-up wire 22 AWG solid (6 colours).
How long does the first stripboard circuit take to build?
About 180 minutes for a beginner maker.
