Projects / Ideas / Rotary indexing table

Rotary indexing table

IntermediateIndustrialIdeaReviewed
In short

How do you build a rotary indexing table?

A NEMA 17 drives a rotary table to set angles for drilling or inspection, with a keypad to enter divisions. You need Arduino Nano, NEMA 17 stepper motor, TMC2209 stepper driver, 4x4 matrix keypad (membrane), 16x2 LCD with I2C backpack (PCF8574), Photo interrupter module (end stop) and 12 V 2 A DC adapter.

Level
Intermediate
Time
About 240 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Divide a circle precisely with a stepper.

How to build it

  1. Home the table
  2. Enter the number of divisions
  3. Work out steps per division
  4. Step to each position
  5. Keep error from building up

Related projects

Common questions

What parts do I need for the rotary indexing table?

Arduino Nano, NEMA 17 stepper motor, TMC2209 stepper driver, 4x4 matrix keypad (membrane), 16x2 LCD with I2C backpack (PCF8574), Photo interrupter module (end stop) and 12 V 2 A DC adapter.

How long does the rotary indexing table take to build?

About 240 minutes for a intermediate maker.