Idea
In short
How do you build a DMX stage light?
An RGB LED fixture listens to DMX512 over RS-485, so a lighting desk or app can control it like a stage light. You need Arduino Nano, RS485 to TTL module (MAX485), High-power LED 3 W (star) × 3, MOSFET IRLZ44N × 3, 12 V 2 A DC adapter, Resistor 220 Ω × 3, Heatsink TO-220 and Resistor 10 kΩ × 3.
- Level
- Advanced
- Time
- About 360 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Receive an industrial lighting protocol.
Parts list
- Development Boards
- Interfaces
- Optoelectronics
- SemiconductorsMOSFET IRLZ44N × 3
- Power
- PassivesResistor 220 Ω × 3
- Tools & Instruments
- PassivesResistor 10 kΩ × 3
How to build it
- Receive DMX at 250 kbaud through the MAX485
- Detect the break that starts each frame
- Read three channels from your start address
- Drive red, green and blue with PWM
- Set the address with DIP switches
Common questions
What parts do I need for the DMX stage light?
Arduino Nano, RS485 to TTL module (MAX485), High-power LED 3 W (star) × 3, MOSFET IRLZ44N × 3, 12 V 2 A DC adapter, Resistor 220 Ω × 3, Heatsink TO-220 and Resistor 10 kΩ × 3.
How long does the DMX stage light take to build?
About 360 minutes for a advanced maker.
