Projects / Ideas / Pixel-art badge

Pixel-art badge

IntermediateWearablesIdeaReviewed
In short

How do you build a pixel-art badge?

A small square colour screen shows pixel art you draw yourself and cycles through three pictures on a button. You need Raspberry Pi Pico H, 1.54 inch TFT (ST7789, 240x240), Tactile push button 6 mm and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 240 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Show pixel art on a badge.

How to build it

  1. Wire the display on SPI
  2. Draw a test pattern
  3. Store a picture
  4. Add two more
  5. Switch with a button

Related projects

Common questions

What parts do I need for the pixel-art badge?

Raspberry Pi Pico H, 1.54 inch TFT (ST7789, 240x240), Tactile push button 6 mm and Breadboard 830 Tie Points.

How long does the pixel-art badge take to build?

About 240 minutes for a intermediate maker.