Idea
In short
How do you build a colour OLED name card?
A small colour OLED shows your name, a logo and a rotating message, like an electronic name card. You need Arduino Nano, 1.5 inch RGB OLED (SSD1351), Tactile push button 6 mm and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Draw colour graphics.
Parts list
- Development Boards
- Displays
- Switches
- Prototyping
How to build it
- Wire the display on SPI
- Draw text
- Draw shapes
- Rotate three screens
- Add a button to switch
Common questions
What parts do I need for the colour OLED name card?
Arduino Nano, 1.5 inch RGB OLED (SSD1351), Tactile push button 6 mm and Breadboard 830 Tie Points.
How long does the colour OLED name card take to build?
About 210 minutes for a intermediate maker.
