Idea
In short
How do you build a solder joint gallery under a microscope?
Make good and bad joints on a scrap board and compare them under a USB microscope to learn what to look for. You need USB microscope, Tweezers set (ESD safe), General-purpose PCB (zero PCB) 10 × 15 cm, Lead-free solder wire (SAC305) and Soldering flux paste.
- Level
- Beginner
- Time
- About 120 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Learn to judge a solder joint.
Parts list
- Tools & Instruments
- Tools & Instruments
- Prototyping
- Tools & Instruments
- Tools & Instruments
How to build it
- Make three good joints
- Make a cold joint
- Make a bridge
- Photograph each under the microscope
- Label what went wrong
Common questions
What parts do I need for the solder joint gallery under a microscope?
USB microscope, Tweezers set (ESD safe), General-purpose PCB (zero PCB) 10 × 15 cm, Lead-free solder wire (SAC305) and Soldering flux paste.
How long does the solder joint gallery under a microscope take to build?
About 120 minutes for a beginner maker.
