Projects / Ideas / Hot-air rework practice

Hot-air rework practice

IntermediateHome LabIdeaReviewed
In short

How do you build a hot-air rework practice?

Practise removing and refitting small surface-mount parts on a scrap board with a hot-air station. The air and the board are hot enough to burn, so use eye protection and ventilation. You need Hot air rework station, SS34 Schottky diode (SMD), Tactile button 6 mm (SMD), 2N2222 SMD (MMBT2222A) and Magnifier lamp (LED).

Level
Intermediate
Time
About 150 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Practise hot-air rework.

Parts list

How to build it

  1. Set a safe temperature and airflow
  2. Tin the pads
  3. Lift one part
  4. Refit it
  5. Check each joint under the magnifier

Related projects

Common questions

What parts do I need for the hot-air rework practice?

Hot air rework station, SS34 Schottky diode (SMD), Tactile button 6 mm (SMD), 2N2222 SMD (MMBT2222A) and Magnifier lamp (LED).

How long does the hot-air rework practice take to build?

About 150 minutes for a intermediate maker.