Idea
In short
How do you build an SOT-23 soldering practice?
Solder a tiny surface-mount MOSFET onto a small board and use it to switch an LED, as a first step into surface-mount parts. You need Si2302 N-channel MOSFET (SOT-23), LED 5 mm green, Resistor 330 Ω, Resistor 10 kΩ, Soldering iron 60 W (adjustable temperature), Magnifier lamp (LED) and Perfboard (dot PCB) 7 × 9 cm.
- Level
- Beginner
- Time
- About 120 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Practise soldering a small SMD part.
Parts list
- Semiconductors
- Semiconductors
- Passives
- Passives
- Tools & Instruments
- Tools & Instruments
- Prototyping
How to build it
- Tin one pad
- Hold the part with tweezers
- Solder one leg then the others
- Check for bridges under the magnifier
- Test with an LED
Common questions
What parts do I need for the SOT-23 soldering practice?
Si2302 N-channel MOSFET (SOT-23), LED 5 mm green, Resistor 330 Ω, Resistor 10 kΩ, Soldering iron 60 W (adjustable temperature), Magnifier lamp (LED) and Perfboard (dot PCB) 7 × 9 cm.
How long does the SOT-23 soldering practice take to build?
About 120 minutes for a beginner maker.
