Idea
In short
How do you build a four-fader MIDI mixer?
Four slide potentiometers become a small USB MIDI controller for a music program. You need Raspberry Pi Pico H, Slide potentiometer 10 kΩ × 4 and USB A to micro-USB cable (data).
- Level
- Intermediate
- Time
- About 120 min
- Parts
- 3
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read several pots and send MIDI control changes.
Parts list
- Development Boards
- Passives
- Cables & Wires
How to build it
- Wire the faders to analog inputs
- Smooth the readings
- Send MIDI control change messages only on change
- Map faders to volume
- Fit the faders in a printed case
Common questions
What parts do I need for the four-fader MIDI mixer?
Raspberry Pi Pico H, Slide potentiometer 10 kΩ × 4 and USB A to micro-USB cable (data).
How long does the four-fader MIDI mixer take to build?
About 120 minutes for a intermediate maker.
