Idea
In short
How do you build a sit-stand desk reminder?
A small timer on your desk shows how long you have been sitting and gives a gentle beep when it is time to stand, then again when to sit. You need Arduino Nano, SSD1306 OLED Display, Tactile push button 6 mm × 2, Passive buzzer and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 120 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Remind yourself to move.
Parts list
- Development Boards
- Displays
- Switches
- Motors & Actuators
- Prototyping
How to build it
- Start a sitting timer
- Show the time on the display
- Beep at the set limit
- Switch to a standing timer
- Keep a daily tally of stand-ups
Related projects
Common questions
What parts do I need for the sit-stand desk reminder?
Arduino Nano, SSD1306 OLED Display, Tactile push button 6 mm × 2, Passive buzzer and Breadboard 830 Tie Points.
How long does the sit-stand desk reminder take to build?
About 120 minutes for a beginner maker.
