Idea
In short
How do you build a single-leg balance timer?
A small motion sensor clipped at your waist times how long you can stand on one leg before swaying past a limit. For fun and training only; stand near a wall. You need Arduino Nano, MPU6050 IMU, SSD1306 OLED Display, Tactile push button 6 mm, Passive buzzer and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 150 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Time a balance exercise.
Parts list
- Development Boards
- Sensors
- Displays
- Switches
- Motors & Actuators
- Prototyping
How to build it
- Read the sensor tilt
- Zero it while standing still
- Start the timer on a button press
- Stop when sway passes the limit
- Keep the best time
Related projects
Common questions
What parts do I need for the single-leg balance timer?
Arduino Nano, MPU6050 IMU, SSD1306 OLED Display, Tactile push button 6 mm, Passive buzzer and Breadboard 830 Tie Points.
How long does the single-leg balance timer take to build?
About 150 minutes for a beginner maker.
