Projects / Ideas / Jump rope counter

Jump rope counter

IntermediateHealthIdeaReviewed
In short

How do you build a jump rope counter?

An MPU6050 in a rope handle senses each turn from the spin of the handle and a Nano counts the jumps and the time on an OLED, with a button to reset. Check the rope is clear of people and objects before you start. You need Arduino Nano, MPU6050 IMU, SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 140 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Count jumps without counting yourself.

Parts list

How to build it

  1. Fix the sensor to the handle
  2. Read the gyroscope
  3. Count each full turn
  4. Show jumps and time
  5. Reset with the button

Related projects

Common questions

What parts do I need for the jump rope counter?

Arduino Nano, MPU6050 IMU, SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.

How long does the jump rope counter take to build?

About 140 minutes for a intermediate maker.