Idea
In short
How do you build an ultra-small weather sensor?
A tiny ESP32-C3 reads an SHT40 and sends readings every ten minutes, sleeping in between. You need ESP32-C3 SuperMini, SHT40 temperature and humidity sensor, Li-Po battery 3.7 V 500 mAh, TP4056 module with protection (USB-C) and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build a low-power Wi-Fi sensor node.
Parts list
- Development Boards
- Sensors
- Batteries
- Power
- Prototyping
How to build it
- Read the sensor
- Connect to Wi-Fi quickly
- Post the readings
- Deep sleep for 10 minutes
- Estimate battery life
Common questions
What parts do I need for the ultra-small weather sensor?
ESP32-C3 SuperMini, SHT40 temperature and humidity sensor, Li-Po battery 3.7 V 500 mAh, TP4056 module with protection (USB-C) and Breadboard 830 Tie Points.
How long does the ultra-small weather sensor take to build?
About 180 minutes for a intermediate maker.
