SHT40 temperature and humidity sensor
Newer Sensirion sensor, accurate and low power.
MeasuresTemperature and relative humidity
Accuracy±0.2 °C, ±1.8 % RH
InterfaceI2C
I2C address0x44
SensorsReviewedMPN SHT40-AD1BUsed in 3 projects
In short
What is the SHT40 temperature and humidity sensor and what is it used for?
Newer Sensirion sensor, accurate and low power. Makers use it for battery weather nodes.
How it works
Sensirion's capacitive humidity sensor with a band-gap temperature sensor and factory calibration.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Temperature and relative humidity |
| Accuracy | ±0.2 °C, ±1.8 % RH |
| Interface | I2C |
| I2C address | 0x44 |
| Supply voltage | 1.08 to 3.6 V |
Pinout
VIN3.3 to 5 V on modules (chip 1.08 to 3.6 V)
GNDGround
SCLI2C clock
SDAI2C data
How to use it
Use the Adafruit SHT4x or Sensirion library at address 0x44. Choose the high-precision mode for best repeatability.
Applications
Battery weather nodes
Builds that use it
Alternatives
- SHT31 temperature and humidity sensorPrevious generation, widely sold
- TMP117 precision temperature sensorTemperature only, more accurate
Common questions
What is the SHT40 temperature and humidity sensor used for?
In maker projects: battery weather nodes.
How does the SHT40 temperature and humidity sensor work?
Sensirion's capacitive humidity sensor with a band-gap temperature sensor and factory calibration.
What voltage does the SHT40 temperature and humidity sensor need?
1.08 to 3.6 V.
How do I connect the SHT40 temperature and humidity sensor to an Arduino or ESP32?
I2C. Pins: VIN (3.3 to 5 V on modules (chip 1.08 to 3.6 V)), GND (Ground), SCL (I2C clock), SDA (I2C data).
What can I use instead of the SHT40 temperature and humidity sensor?
SHT31 temperature and humidity sensor and TMP117 precision temperature sensor.
