Idea
In short
How do you build a seed germination chamber?
A box with a heating mat, LED grow light and humidity sensor keeps seed trays warm and moist for fast, even sprouting. You need Arduino Nano, AHT20 temperature and humidity sensor, DS3231 RTC module, Relay module 2-channel 5 V, Power resistor 10 Ω 5 W (cement), 12 V LED strip warm white (5 m, 2835), 12 V 2 A DC adapter and 16x2 LCD with I2C backpack (PCF8574).
- Level
- Intermediate
- Time
- About 120 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Combine temperature, humidity and light timing in one controller.
Parts list
- Development Boards
- Sensors
- Sensors
- Interfaces
- Passives
- Optoelectronics
- Power
- Displays
How to build it
- Glue a power resistor to an aluminium plate as a gentle heater
- Keep 25 to 28 °C with on-off control
- Run the LEDs 16 hours a day from the RTC
- Show humidity so you know when to mist
- Count days since sowing
Common questions
What parts do I need for the seed germination chamber?
Arduino Nano, AHT20 temperature and humidity sensor, DS3231 RTC module, Relay module 2-channel 5 V, Power resistor 10 Ω 5 W (cement), 12 V LED strip warm white (5 m, 2835), 12 V 2 A DC adapter and 16x2 LCD with I2C backpack (PCF8574).
How long does the seed germination chamber take to build?
About 120 minutes for a intermediate maker.
