Projects / Ideas / Screw-terminal breakout for sensors

Screw-terminal breakout for sensors

BeginnerLearningIdeaReviewed
In short

How do you build a screw-terminal breakout for sensors?

Build a small perfboard with screw terminals so sensors plug in without a breadboard, a tidy step toward permanent projects. You need Perfboard (dot PCB) 7 × 9 cm, Screw terminal block 3-pin (5 mm) × 3, Header pins right angle 2.54 mm and Arduino Nano.

Level
Beginner
Time
About 180 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Build a reusable breakout.

How to build it

  1. Plan the layout
  2. Solder the terminals
  3. Add the headers
  4. Test each row with a meter
  5. Label the pins

Related projects

Common questions

What parts do I need for the screw-terminal breakout for sensors?

Perfboard (dot PCB) 7 × 9 cm, Screw terminal block 3-pin (5 mm) × 3, Header pins right angle 2.54 mm and Arduino Nano.

How long does the screw-terminal breakout for sensors take to build?

About 180 minutes for a beginner maker.