Idea
In short
How do you build a schmitt trigger noisy-signal lab?
Clean a slow, noisy signal with a Schmitt trigger and compare it with a normal gate. You need 74HC14 hex Schmitt-trigger inverter, 74HC04 hex inverter, Resistor 10 kΩ, Ceramic Capacitor 100 nF, Potentiometer 10 kΩ, LED 5 mm red × 2, Resistor 220 Ω × 2 and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
See hysteresis at work.
Parts list
- Integrated Circuits
- Integrated Circuits
- Passives
- Passives
- Passives
- SemiconductorsLED 5 mm red × 2
- PassivesResistor 220 Ω × 2
- Prototyping
How to build it
- Feed a slow ramp to both gates
- Watch the outputs
- Add noise with a pot
- Measure thresholds
- Make a debounced input
Common questions
What parts do I need for the schmitt trigger noisy-signal lab?
74HC14 hex Schmitt-trigger inverter, 74HC04 hex inverter, Resistor 10 kΩ, Ceramic Capacitor 100 nF, Potentiometer 10 kΩ, LED 5 mm red × 2, Resistor 220 Ω × 2 and Breadboard 830 Tie Points.
How long does the schmitt trigger noisy-signal lab take to build?
About 150 minutes for a intermediate maker.
