Idea
In short
How do you build a PC to board over RS-485?
A USB RS-485 adapter links a computer to a board over a twisted pair, and a serial terminal sends commands to switch a LED and read a value. You need USB to RS485 adapter, Arduino Nano, MAX485 RS-485 transceiver, LED 5 mm red, Resistor 330 Ω, Resistor 100 kΩ and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Link a computer to a board over RS-485.
Parts list
- Interfaces
- Development Boards
- Integrated Circuits
- Semiconductors
- Passives
- Passives
- Prototyping
How to build it
- Wire the transceiver with direction control
- Connect the adapter pair
- Send a command from a terminal
- Answer with a sensor value
- Add termination and test a long cable
Common questions
What parts do I need for the PC to board over RS-485?
USB to RS485 adapter, Arduino Nano, MAX485 RS-485 transceiver, LED 5 mm red, Resistor 330 Ω, Resistor 100 kΩ and Breadboard 830 Tie Points.
How long does the PC to board over RS-485 take to build?
About 210 minutes for a intermediate maker.
