MAX485 RS-485 transceiver
Turns UART into RS-485 for long cables and Modbus.
FunctionHalf-duplex RS-485 transceiver
Supply voltage5 V
SpeedUp to 2.5 Mbps
PackageDIP-8
Integrated CircuitsReviewedMPN MAX485CPAUsed in 3 projects
In short
What is the MAX485 RS-485 transceiver and what is it used for?
Turns UART into RS-485 for long cables and Modbus. Makers use it for modbus sensors, long cables.
How it works
Converts UART logic to a differential signal that rejects noise over long cables.
Key specifications
| Integrated circuit spec | Value |
|---|---|
| Function | Half-duplex RS-485 transceiver |
| Supply voltage | 5 V |
| Speed | Up to 2.5 Mbps |
| Package | DIP-8 |
Pinout
1RO, receiver output
2RE, receiver enable, active LOW
3DE, driver enable
4DI, driver input
5GND
6A
7B
8VCC, 5 V
How to use it
Tie RE and DE together to one pin: HIGH to transmit, LOW to receive. Twist A and B together and fit 120 Ω termination at both ends of long cables. Used for Modbus sensors and links up to about 1 km.
Applications
Modbus sensorslong cables
Alternatives
- MAX232 RS-232 transceiverRS-232 for short PC links
- TJA1050 CAN transceiverCAN bus instead
Common questions
What is the MAX485 RS-485 transceiver used for?
In maker projects: modbus sensors, long cables.
How does the MAX485 RS-485 transceiver work?
Converts UART logic to a differential signal that rejects noise over long cables.
What voltage does the MAX485 RS-485 transceiver need?
5 V.
What can I use instead of the MAX485 RS-485 transceiver?
MAX232 RS-232 transceiver and TJA1050 CAN transceiver.
