Idea
In short
How do you build a mirror-hand robotic hand?
A camera tracks your hand and a 5-finger robot hand copies it. You need Raspberry Pi 5, Raspberry Pi Camera Module 3, MG90S metal gear micro servo × 5 and PCA9685 16-channel servo driver.
- Level
- Advanced
- Time
- About 480 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Map vision landmarks to servos.
Parts list
- Single Board Computers
- SBC Accessories
- Motors & Actuators
- Motor Drivers
How to build it
- Get hand landmarks
- Measure each finger's bend
- Map to servo angles
- Smooth the motion
- Limit force
Related projects
Common questions
What parts do I need for the mirror-hand robotic hand?
Raspberry Pi 5, Raspberry Pi Camera Module 3, MG90S metal gear micro servo × 5 and PCA9685 16-channel servo driver.
How long does the mirror-hand robotic hand take to build?
About 480 minutes for a advanced maker.
