Idea
In short
How do you build an RFID attendance sign-in?
Students tap a card and the board logs the card number and time to a file. You need Arduino Nano, RC522 RFID reader, RFID tags 13.56 MHz (MIFARE Classic 1K), DS3231 RTC module, MicroSD Card Module, Active buzzer 5 V and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 270 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read cards and log events.
Parts list
- Development Boards
- Wireless
- Wireless
- Sensors
- Interfaces
- Motors & Actuators
- Prototyping
How to build it
- Wire the reader on SPI
- Read the card ID
- Add the clock time
- Write a line per tap
- Beep on success
Common questions
What parts do I need for the RFID attendance sign-in?
Arduino Nano, RC522 RFID reader, RFID tags 13.56 MHz (MIFARE Classic 1K), DS3231 RTC module, MicroSD Card Module, Active buzzer 5 V and Breadboard 830 Tie Points.
How long does the RFID attendance sign-in take to build?
About 270 minutes for a intermediate maker.
