Idea
In short
How do you build an RF signal strength meter?
A sub-GHz radio reports signal strength so you can find the best antenna spot for 433 or 868 MHz links. You need Arduino Nano, CC1101 sub-GHz transceiver, SSD1306 OLED Display and SMA connector (PCB edge).
- Level
- Intermediate
- Time
- About 120 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read RSSI and compare antennas.
Parts list
- Development Boards
- Wireless
- Displays
- Connectors
How to build it
- Set the CC1101 to your band
- Read RSSI continuously
- Show a bar and peak hold
- Walk around to map coverage
- Compare antennas
Common questions
What parts do I need for the RF signal strength meter?
Arduino Nano, CC1101 sub-GHz transceiver, SSD1306 OLED Display and SMA connector (PCB edge).
How long does the RF signal strength meter take to build?
About 120 minutes for a intermediate maker.
