Components / Wireless / CC1101 sub-GHz transceiver

CC1101 sub-GHz transceiver

Flexible sub-GHz radio for 433 and 868 MHz experiments.

RadioFSK / ASK / OOK
Band315, 433, 868 or 915 MHz
InterfaceSPI
Supply voltage1.8 to 3.6 V
WirelessReviewedMPN CC1101Used in 2 projects
CC1101
In short

What is the CC1101 sub-GHz transceiver and what is it used for?

Flexible sub-GHz radio for 433 and 868 MHz experiments. Makers use it for sub-GHz remote experiments.

How it works

A TI CC1101 sub-GHz transceiver supporting FSK, GFSK, ASK and OOK with packet handling.

Key specifications

Wireless module specValue
RadioFSK / ASK / OOK
Band315, 433, 868 or 915 MHz
InterfaceSPI
Supply voltage1.8 to 3.6 V

Pinout

VCC1.8 to 3.6 V
GNDGround
CSNSPI chip select
SCK MOSI MISOSPI
GDO0 GDO2Configurable interrupt outputs

How to use it

Use the SmartRC-CC1101-Driver-Lib. Each module's antenna is matched for one band, so buy the 433 MHz version for India. It is 3.3 V only.

Applications

Alternatives

Buy at

Common questions

What is the CC1101 sub-GHz transceiver used for?

In maker projects: sub-GHz remote experiments.

How does the CC1101 sub-GHz transceiver work?

A TI CC1101 sub-GHz transceiver supporting FSK, GFSK, ASK and OOK with packet handling.

What voltage does the CC1101 sub-GHz transceiver need?

1.8 to 3.6 V.

How do I connect the CC1101 sub-GHz transceiver to an Arduino or ESP32?

SPI. Pins: VCC (1.8 to 3.6 V), GND (Ground), CSN (SPI chip select), SCK MOSI MISO (SPI), GDO0 GDO2 (Configurable interrupt outputs).

What can I use instead of the CC1101 sub-GHz transceiver?

433 MHz RF transmitter and receiver pair and LoRa SX1278 Ra-02 module (433 MHz).