Projects / Ideas / 125 kHz card reader demo

125 kHz card reader demo

BeginnerCommunicationIdeaReviewed
In short

How do you build a 125 kHz card reader demo?

Read the ID of old-style 125 kHz cards over UART and show it on a display. You need Arduino Uno R3, RDM6300 125 kHz RFID reader, SSD1306 OLED Display and Breadboard 830 Tie Points.

Level
Beginner
Time
About 120 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Read UART-based tag readers.

How to build it

  1. Wire the reader to a UART
  2. Read the 14-byte frame
  3. Check the checksum
  4. Show the ID
  5. Beep on known cards

Related projects

Common questions

What parts do I need for the 125 kHz card reader demo?

Arduino Uno R3, RDM6300 125 kHz RFID reader, SSD1306 OLED Display and Breadboard 830 Tie Points.

How long does the 125 kHz card reader demo take to build?

About 120 minutes for a beginner maker.