Idea
In short
How do you build a class attendance counter?
Each student taps a card on a reader and the board counts unique cards for the session. Use only with consent and keep no personal data. You need Arduino Uno R3, RC522 RFID reader, RFID tags 13.56 MHz (MIFARE Classic 1K) × 3, 16x2 LCD with I2C backpack (PCF8574) and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 270 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Count unique card taps.
Parts list
- Development Boards
- Wireless
- Wireless
- Displays
- Prototyping
How to build it
- Wire the reader on SPI
- Read a card ID
- Store the IDs seen
- Ignore repeated taps
- Show the unique count
Common questions
What parts do I need for the class attendance counter?
Arduino Uno R3, RC522 RFID reader, RFID tags 13.56 MHz (MIFARE Classic 1K) × 3, 16x2 LCD with I2C backpack (PCF8574) and Breadboard 830 Tie Points.
How long does the class attendance counter take to build?
About 270 minutes for a intermediate maker.
