Idea
In short
How do you build an IR battle tanks?
Two small tanks shoot invisible IR shots and count hits, each driven from a phone over Bluetooth. You need ESP32 DevKit V1 × 2, IR LED 940 nm (5 mm) × 2, IR receiver VS1838B × 2, Tank tracks chassis kit × 2, TB6612FNG Motor Driver × 2 and Li-Po 2S 7.4 V 2200 mAh 25C (RC) × 2.
- Level
- Intermediate
- Time
- About 480 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Send and detect IR signals as game shots.
Parts list
- Development BoardsESP32 DevKit V1 × 2
- Optoelectronics
- Sensors
- Mechanical & Hardware
- Motor Drivers
- Batteries
How to build it
- Drive each tank from a phone over BLE
- Fire a coded IR burst
- Detect hits from the other tank
- Lose a life on each hit
- Flash LEDs when out
Common questions
What parts do I need for the IR battle tanks?
ESP32 DevKit V1 × 2, IR LED 940 nm (5 mm) × 2, IR receiver VS1838B × 2, Tank tracks chassis kit × 2, TB6612FNG Motor Driver × 2 and Li-Po 2S 7.4 V 2200 mAh 25C (RC) × 2.
How long does the IR battle tanks take to build?
About 480 minutes for a intermediate maker.
