Idea
In short
How do you build a magnetic field mapper?
A compass chip maps the magnetic field around a small magnet and a motor, drawn as a heat grid on a display. You need Arduino Nano, HMC5883L / QMC5883L compass module, Neodymium magnets (10 × 3 mm), SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Map a magnetic field.
Parts list
- Development Boards
- Sensors
- Mechanical & Hardware
- Displays
- Prototyping
How to build it
- Wire the module
- Read the three axes
- Compute field strength
- Move the sensor over a grid
- Plot the readings
Common questions
What parts do I need for the magnetic field mapper?
Arduino Nano, HMC5883L / QMC5883L compass module, Neodymium magnets (10 × 3 mm), SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the magnetic field mapper take to build?
About 240 minutes for a intermediate maker.
