Projects / Ideas / Tilt-corrected compass

Tilt-corrected compass

IntermediateLearningIdeaReviewed
In short

How do you build a tilt-corrected compass?

An orientation sensor fuses its own gyro and magnetometer to show a stable heading, pitch and roll. You need Arduino Nano, BNO055 absolute orientation sensor, SSD1306 OLED Display and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 240 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Read orientation from a fusion sensor.

How to build it

  1. Wire the sensor on I2C
  2. Calibrate it by moving it in a figure eight
  3. Read heading pitch and roll
  4. Show a compass needle
  5. Compare with a phone compass

Related projects

Common questions

What parts do I need for the tilt-corrected compass?

Arduino Nano, BNO055 absolute orientation sensor, SSD1306 OLED Display and Breadboard 830 Tie Points.

How long does the tilt-corrected compass take to build?

About 240 minutes for a intermediate maker.