Projects / Ideas / Magnetic knob with angle readout

Magnetic knob with angle readout

IntermediateLearningIdeaReviewed
In short

How do you build a magnetic knob with angle readout?

A magnetic angle sensor reads a turning knob with no contact and no wear, and shows the angle in degrees. You need Arduino Nano, AS5600 magnetic angle encoder, SSD1306 OLED Display and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Read an angle without contact.

How to build it

  1. Wire the sensor on I2C
  2. Read the raw angle
  3. Convert to degrees
  4. Count full turns
  5. Show angle and turns

Related projects

Common questions

What parts do I need for the magnetic knob with angle readout?

Arduino Nano, AS5600 magnetic angle encoder, SSD1306 OLED Display and Breadboard 830 Tie Points.

How long does the magnetic knob with angle readout take to build?

About 210 minutes for a intermediate maker.