Idea
In short
How do you build a precision water bath thermometer?
A MAX31865 reads a PT100 probe to a hundredth of a degree for testing sensors in a stirred water bath. You need Raspberry Pi Pico H, MAX31865 RTD amplifier (PT100), SSD1306 OLED Display and Tactile push button 6 mm.
- Level
- Advanced
- Time
- About 210 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read a platinum RTD with a 4-wire or 3-wire connection and linearise it.
Parts list
- Development Boards
- Sensors
- Displays
- Switches
How to build it
- Wire the amplifier over SPI
- Choose 2, 3 or 4 wire mode to match the probe
- Use the Callendar-Van Dusen equation
- Calibrate with ice water and boiling water
- Log drift over an hour
Common questions
What parts do I need for the precision water bath thermometer?
Raspberry Pi Pico H, MAX31865 RTD amplifier (PT100), SSD1306 OLED Display and Tactile push button 6 mm.
How long does the precision water bath thermometer take to build?
About 210 minutes for a advanced maker.
