Projects / Ideas / Pico time-of-flight distance gauge

Pico time-of-flight distance gauge

IntermediateTest & MeasurementIdeaReviewed
In short

How do you build a pico time-of-flight distance gauge?

A Pico reads a VL53L0X time-of-flight sensor over I2C and shows millimetres on an OLED with a hold button. The sensor uses a small invisible laser: do not stare into it. You need Raspberry Pi Pico H, VL53L0X time-of-flight distance sensor, SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 140 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Measure short distances to the millimetre.

How to build it

  1. Wire the sensor and display on I2C
  2. Start ranging
  3. Read the distance in millimetres
  4. Average five readings
  5. Hold with a button

Related projects

Common questions

What parts do I need for the pico time-of-flight distance gauge?

Raspberry Pi Pico H, VL53L0X time-of-flight distance sensor, SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.

How long does the pico time-of-flight distance gauge take to build?

About 140 minutes for a intermediate maker.