Idea
In short
How do you build a linear versus log pot curve lab?
Measure a linear pot and a trimmer across their travel and plot the curve, with a note on log pots for audio. You need Arduino Nano, Potentiometer 100 kΩ (linear), Potentiometer 10 kΩ, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Plot a pot's curve.
Parts list
- Development Boards
- Passives
- Passives
- Displays
- Prototyping
How to build it
- Wire both pots
- Read each as the knob turns
- Log values in 10 steps
- Plot the curves
- Note the difference
Common questions
What parts do I need for the linear versus log pot curve lab?
Arduino Nano, Potentiometer 100 kΩ (linear), Potentiometer 10 kΩ, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the linear versus log pot curve lab take to build?
About 150 minutes for a intermediate maker.
