Idea
In short
How do you build an eight sensors on one input?
An analog multiplexer lets a board read eight knobs or sensors through a single analog pin, selecting each one in turn. You need Arduino Nano, CD4051 analog multiplexer, Potentiometer 10 kΩ × 8, SSD1306 OLED Display and Breadboard 830 Tie Points × 2.
- Level
- Intermediate
- Time
- About 270 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read many sensors through one pin.
Parts list
- Development Boards
- Integrated Circuits
- Passives
- Displays
- Prototyping
How to build it
- Wire the multiplexer
- Select channels with three pins
- Read one channel at a time
- Scan all eight
- Show the values as bars
Common questions
What parts do I need for the eight sensors on one input?
Arduino Nano, CD4051 analog multiplexer, Potentiometer 10 kΩ × 8, SSD1306 OLED Display and Breadboard 830 Tie Points × 2.
How long does the eight sensors on one input take to build?
About 270 minutes for a intermediate maker.
