Idea
In short
How do you build an eight-sensor scanner with an analog multiplexer?
An analog multiplexer lets one input read eight knobs or sensors in turn. You need Arduino Nano, 74HC4051 8-channel analog multiplexer, Potentiometer 10 kΩ × 8, SSD1306 OLED Display and Breadboard 830 Tie Points × 2.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read many analog inputs through one pin.
Parts list
- Development Boards
- Integrated Circuits
- Passives
- Displays
- Prototyping
How to build it
- Wire the three select pins
- Wire eight pots
- Scan the channels
- Print the values
- Show bars on the OLED
Common questions
What parts do I need for the eight-sensor scanner with an analog multiplexer?
Arduino Nano, 74HC4051 8-channel analog multiplexer, Potentiometer 10 kΩ × 8, SSD1306 OLED Display and Breadboard 830 Tie Points × 2.
How long does the eight-sensor scanner with an analog multiplexer take to build?
About 240 minutes for a intermediate maker.
