Idea
In short
How do you build a poE-powered Pi camera?
A Pi with a PoE+ HAT and a camera runs on one network cable for power and data, ideal for a gate or garden. You need Raspberry Pi 4 Model B (4 GB), Raspberry Pi PoE+ HAT, SanDisk microSD card 32 GB (A1, Class 10), Raspberry Pi Camera Module 3, Waterproof enclosure IP65 (junction box) and Ethernet cable Cat6 (3 m).
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Use Power over Ethernet to power a remote device.
Parts list
- Single Board Computers
- SBC Accessories
- SBC Accessories
- SBC Accessories
- Mechanical & Hardware
- Cables & Wires
How to build it
- Fit the PoE+ HAT
- Connect to a PoE switch
- Stream the camera on the network
- Seal the box with a gland for the cable
- Monitor CPU temperature
Common questions
What parts do I need for the poE-powered Pi camera?
Raspberry Pi 4 Model B (4 GB), Raspberry Pi PoE+ HAT, SanDisk microSD card 32 GB (A1, Class 10), Raspberry Pi Camera Module 3, Waterproof enclosure IP65 (junction box) and Ethernet cable Cat6 (3 m).
How long does the poE-powered Pi camera take to build?
About 150 minutes for a intermediate maker.
