Components / Raspberry Pi and Jetson / Raspberry Pi PoE+ HAT

Raspberry Pi PoE+ HAT

Powers a Pi 4 from a PoE+ Ethernet switch.

FunctionPower over Ethernet
Rating802.3at, up to 5 V 4 A to the Pi
SBC AccessoriesReviewedUsed in 3 projects
RASPBERR
In short

What is the Raspberry Pi PoE+ HAT and what is it used for?

Powers a Pi 4 from a PoE+ Ethernet switch. Makers use it for network cameras without a power cable.

How it works

It takes up to 25.5 W from the network cable and converts it to 5 V for the Pi.

Key specifications

Interface module specValue
FunctionPower over Ethernet
Rating802.3at, up to 5 V 4 A to the Pi

Pinout

PoE header4-pin PoE pins on the Pi
40-pinPass-through

How to use it

Needs an 802.3at (PoE+) switch or injector. Made for the Pi 4 and Pi 3B+, so check compatibility before using it with a Pi 5. Its fan cools the board too.

Applications

Alternatives

Buy at

Common questions

What is the Raspberry Pi PoE+ HAT used for?

In maker projects: network cameras without a power cable.

How does the Raspberry Pi PoE+ HAT work?

It takes up to 25.5 W from the network cable and converts it to 5 V for the Pi.

What can I use instead of the Raspberry Pi PoE+ HAT?

Raspberry Pi 15 W USB-C power supply.