Projects / Ideas / Air purifier fan controller

Air purifier fan controller

IntermediateSmart HomeIdeaReviewed
In short

How do you build an air purifier fan controller?

Raise a 12 V fan's speed automatically when particle levels rise, using a PWM driver. You need ESP32 DevKit V1, PMS5003 particulate matter sensor, MOSFET IRLZ44N, Resistor 10 kΩ, Rectifier Diode 1N4007, 12 V 2 A DC adapter and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Control a fan from sensor data.

How to build it

  1. Read the particle sensor
  2. Map levels to a fan duty
  3. Drive a 12 V fan with a MOSFET
  4. Add a flyback diode
  5. Add a manual speed button

Related projects

Common questions

What parts do I need for the air purifier fan controller?

ESP32 DevKit V1, PMS5003 particulate matter sensor, MOSFET IRLZ44N, Resistor 10 kΩ, Rectifier Diode 1N4007, 12 V 2 A DC adapter and Breadboard 830 Tie Points.

How long does the air purifier fan controller take to build?

About 210 minutes for a intermediate maker.