Idea
In short
How do you build a PM2.5 air quality display?
A laser dust sensor shows particle readings and a coloured status for a window sill. You need ESP32 DevKit V1, SDS011 particulate matter sensor, SSD1306 OLED Display, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read a particulate sensor and display trends.
Parts list
- Development Boards
- Sensors
- Displays
- Prototyping
- Prototyping
How to build it
- Read the sensor over UART
- Average over a minute
- Map to colours
- Show a trend graph
- Let the fan warm up before readings
Common questions
What parts do I need for the PM2.5 air quality display?
ESP32 DevKit V1, SDS011 particulate matter sensor, SSD1306 OLED Display, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the PM2.5 air quality display take to build?
About 180 minutes for a intermediate maker.
