Idea
In short
How do you build a room CO2 reminder?
A CO2 sensor shows ppm on a display and flashes a light to remind you to open a window when the level is high. You need ESP32 DevKit V1, SCD40 CO2 sensor, SSD1306 OLED Display, LED 5 mm red, LED 5 mm green, Resistor 220 Ω × 2 and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Monitor indoor air quality.
Parts list
- Development Boards
- Sensors
- Displays
- Semiconductors
- Semiconductors
- PassivesResistor 220 Ω × 2
- Prototyping
How to build it
- Read CO2, temperature and humidity
- Show them on the OLED
- Set two thresholds
- Light a status LED
- Log the day's peak
Common questions
What parts do I need for the room CO2 reminder?
ESP32 DevKit V1, SCD40 CO2 sensor, SSD1306 OLED Display, LED 5 mm red, LED 5 mm green, Resistor 220 Ω × 2 and Breadboard 830 Tie Points.
How long does the room CO2 reminder take to build?
About 180 minutes for a intermediate maker.
