Idea
In short
How do you build an air purifier fan controlled by PM2.5?
An SDS011 sensor runs a small 12 V fan faster as dust rises, a simple DIY purifier built around a filter. You need ESP32 DevKit V1, SDS011 particulate matter sensor, 12 V DC fan 80 mm, IRLZ34N logic-level MOSFET, 12 V 2 A DC adapter and LM2596 Buck Module.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Control a fan speed from a sensor reading.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Semiconductors
- Power
- Power
How to build it
- Read PM2.5 over UART
- Choose three fan speeds
- Drive the fan with PWM through a MOSFET
- Add a hysteresis so it does not flap
- Log air before and after the filter
Common questions
What parts do I need for the air purifier fan controlled by PM2.5?
ESP32 DevKit V1, SDS011 particulate matter sensor, 12 V DC fan 80 mm, IRLZ34N logic-level MOSFET, 12 V 2 A DC adapter and LM2596 Buck Module.
How long does the air purifier fan controlled by PM2.5 take to build?
About 150 minutes for a intermediate maker.
