Idea
In short
How do you build a humidity-triggered bathroom fan?
A humidity sensor turns a 12 V fan on when the shower raises humidity quickly, then off when the air dries. You need Arduino Nano, Si7021 humidity sensor, 12 V DC fan 80 mm, IRLZ34N logic-level MOSFET, 12 V 2 A DC adapter and LM2596 Buck Module.
- Level
- Intermediate
- Time
- About 90 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Detect a rapid rise in humidity instead of a fixed level.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Semiconductors
- Power
- Power
How to build it
- Read humidity every 10 seconds
- Compare with a slow average
- Start the fan when the rise is fast
- Stop when back to baseline
- Add a manual button
Common questions
What parts do I need for the humidity-triggered bathroom fan?
Arduino Nano, Si7021 humidity sensor, 12 V DC fan 80 mm, IRLZ34N logic-level MOSFET, 12 V 2 A DC adapter and LM2596 Buck Module.
How long does the humidity-triggered bathroom fan take to build?
About 90 minutes for a intermediate maker.
