Idea
In short
How do you build a PLL frequency multiplier?
A CD4046 and a 4017 divider lock onto an input and multiply its frequency by 10. You need CD4046 phase-locked loop, CD4017 Counter, Resistor 10 kΩ × 2, Resistor 100 kΩ, Ceramic capacitor 10 nF, Electrolytic capacitor 10 µF, Breadboard 830 Tie Points, 9 V battery and 9 V battery snap with DC jack.
- Level
- Advanced
- Time
- About 180 min
- Parts
- 9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Understand phase-locked loops.
Parts list
- Integrated Circuits
- Integrated Circuits
- PassivesResistor 10 kΩ × 2
- Passives
- Passives
- Passives
- Prototyping
- Batteries
- Power
How to build it
- Run the VCO
- Divide its output by 10
- Feed it back to the phase comparator
- Lock to an input from a 555
- Check the output is 10 times the input
Common questions
What parts do I need for the PLL frequency multiplier?
CD4046 phase-locked loop, CD4017 Counter, Resistor 10 kΩ × 2, Resistor 100 kΩ, Ceramic capacitor 10 nF, Electrolytic capacitor 10 µF, Breadboard 830 Tie Points, 9 V battery and 9 V battery snap with DC jack.
How long does the PLL frequency multiplier take to build?
About 180 minutes for a advanced maker.
