Idea
In short
How do you build a PLC basics with Arduino Opta?
Program an Arduino Opta in ladder logic for a start-stop motor circuit with interlocks. You need Arduino Opta, Emergency stop button (mushroom), Push button 16 mm metal (momentary, LED) × 2, Contactor 230 V coil 25 A and DIN rail (35 mm) and mounting clips.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Learn PLC programming and safety interlocks.
Parts list
- Development Boards
- Switches
- Switches
- SwitchesUse a 24 V coil version for the lab
- Mechanical & Hardware
How to build it
- Wire start, stop and e-stop inputs
- Write a seal-in circuit in ladder
- Add an overload input
- Drive a contactor output
- Leave all mains work to a qualified electrician
Common questions
What parts do I need for the PLC basics with Arduino Opta?
Arduino Opta, Emergency stop button (mushroom), Push button 16 mm metal (momentary, LED) × 2, Contactor 230 V coil 25 A and DIN rail (35 mm) and mounting clips. Contactor 230 V coil 25 A: Use a 24 V coil version for the lab.
How long does the PLC basics with Arduino Opta take to build?
About 240 minutes for a intermediate maker.
