Arduino Opta
Small PLC for DIN rail that you program with the Arduino IDE or PLC languages.
MicrocontrollerSTM32H747 dual-core
Input voltage12 to 24 V DC
I/O pins8 inputs, 4 relay outputs
Development BoardsReviewedUsed in 1 project
In short
What is the Arduino Opta and what is it used for?
Small PLC for DIN rail that you program with the Arduino IDE or PLC languages. Makers use it for learning industrial automation.
How it works
An STM32H747 dual-core controller in a DIN-rail PLC case with protected inputs and relays.
Key specifications
| Development board spec | Value |
|---|---|
| Microcontroller | STM32H747 dual-core |
| Input voltage | 12 to 24 V DC |
| I/O pins | 8 inputs, 4 relay outputs |
Pinout
I1 to I8Inputs, digital or 0 to 10 V analog
Relay 1 to 4Relay outputs, 10 A each
24V12 to 24 V DC supply
RS-485Modbus RTU (on the RS485 versions)
EthernetModbus TCP
How to use it
Program with the Arduino PLC IDE in IEC 61131-3 languages (ladder, function block, structured text) or with Arduino sketches. Mount on a DIN rail, and have mains wiring on the relay side done by a qualified electrician.
Applications
Learning industrial automation
Builds that use it
Alternatives
- Arduino Portenta H7Same chip for custom builds
- Arduino Mega 2560 R3Learning board, not for panels
Common questions
What is the Arduino Opta used for?
In maker projects: learning industrial automation.
How does the Arduino Opta work?
An STM32H747 dual-core controller in a DIN-rail PLC case with protected inputs and relays.
What can I use instead of the Arduino Opta?
Arduino Portenta H7 and Arduino Mega 2560 R3.
