Idea
In short
How do you build a light curtain safety stop?
A row of IR beams stops a machine model the moment a hand breaks any beam. You need Arduino Nano, IR LED 940 nm (5 mm) × 6, Photodiode / IR receiver diode (5 mm black) × 6, Resistor 220 Ω × 6, Resistor 10 kΩ × 6, Relay Module 5V and Emergency stop button (mushroom).
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Make a safety interlock.
Parts list
- Development Boards
- Optoelectronics
- Optoelectronics
- PassivesResistor 220 Ω × 6
- PassivesResistor 10 kΩ × 6
- Interfaces
- Switches
How to build it
- Align emitters and receivers
- Scan beams quickly
- Drop the relay when any beam breaks
- Require a manual reset
- Use certified gear for real machines
Common questions
What parts do I need for the light curtain safety stop?
Arduino Nano, IR LED 940 nm (5 mm) × 6, Photodiode / IR receiver diode (5 mm black) × 6, Resistor 220 Ω × 6, Resistor 10 kΩ × 6, Relay Module 5V and Emergency stop button (mushroom).
How long does the light curtain safety stop take to build?
About 240 minutes for a intermediate maker.
