Idea
In short
How do you build a plank hold timer?
A small motion sensor clipped at your back times how long you hold a plank and beeps when your hips sag or lift too far from level. A simple fitness timer. Stop whenever you feel pain, ask a trainer about your form, and treat it as a game, not a medical or coaching device. You need Arduino Nano, MPU6050 IMU, SSD1306 OLED Display, Passive buzzer, Tactile push button 6 mm, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Beginner
- Time
- About 80 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Time a plank and warn about sagging.
Parts list
- Development Boards
- Sensors
- Displays
- Motors & Actuators
- Switches
- Prototyping
- Prototyping
How to build it
- Clip the sensor to your back
- Set the level position with a button
- Start timing when level
- Beep if the angle moves too far
- Show the time held
Related projects
Common questions
What parts do I need for the plank hold timer?
Arduino Nano, MPU6050 IMU, SSD1306 OLED Display, Passive buzzer, Tactile push button 6 mm, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the plank hold timer take to build?
About 80 minutes for a beginner maker.
